ZBrushCentral

3D Gizmo Scale option

Hi, I currently have two issues with my current project. The first one is that I imported an OBJ made on ZBCore, I tried to scale the object with the 3DGizmo (one of the greatest features) but it couldn’t manage to change it’s scale value. The little image that commonly appears on the Subtool Menu wasn’t showing. I tried to unify the subtool, but it disappeared.

The second issue was that after I pressed ‘Fit to view’ all my sub tools disappeared from the screen. And this happened even if I changed from subtool to subtool. After some attempts ZBC crashed.

Also I manage to work all my project with a floor in the Y axis and would like to know if there’s any way to rotate all my subtools or I must rotate them one by one :(.

Best regards.

It’s possible that there is a stray polygon somewhere which is causing the problem but it’s difficult to be sure without seeing the model. Can you upload the project (or original OBJ) somewhere so I can take a look?

Sure, it’s a pretty simple model, I have to mention that the model was optimized to 3D Printing, to reduce the polygons count.
https://sketchfab.com/models/d9663b77e0aa456d8fb627019caecf70

Hi,

Many thanks, that’s very useful. It does appear to be some stray polygons which are a very long way from the main model. Even so, the model behaves oddly and I shall pass on to the developers.

I managed to get rid of the extra stuff by Shift+Ctrl+dragging over the model and then pressing Tool>Geometry>Modify Topology>Del Hidden. You can download my revised version here:

https://www.dropbox.com/s/oowuntip2ctcz1n/Pocket_rev.zip?dl=1

HTH,

Thanks a lot Marcus, it looks identical and there’s any problem when I use the ‘Fit to view’ button.
Have a great weekend!