ZBrushCentral

Alien Xenomorph for casting in "ArteStone"

Hi all!
I try to do a hobby project. I want to cast a Alien Xenomorph in ArteStone
The sculptirs mode and the Live boolean is a god sent for that :smiley:
Here are some pictures from the building in ZBrush and the printed parts thats came today.

dcyry_o.jpg
First try of the head. I don’t like them and I try again

vwyRx_o.jpg

That is better in my opinion … and I go on
TA0mr_o.jpg
sQBAz_o.jpg

4NOcf_o.jpg
First try to bring down the poly count. Thats work fine and I can do more

kIuZ9_o.jpg

Start cut in parts
5qYax_o.jpg
QL5xx_o.jpg

Theoretic planing for casting molds
aywcS_o.jpg

And here are the printed parts …
UCnyK_o.jpg
k4EMh_o.jpg
JuWU5_o.jpg
TkgdD_o.jpg
A7OFY_o.jpg
Con2c_o.jpg

Attachments

dcyry_o.jpg

vwyRx_o.jpg

TA0mr_o.jpg

sQBAz_o.jpg

4NOcf_o.jpg

kIuZ9_o.jpg

5qYax_o.jpg

QL5xx_o.jpg

aywcS_o.jpg

UCnyK_o.jpg

k4EMh_o.jpg

JuWU5_o.jpg

TkgdD_o.jpg

A7OFY_o.jpg

Con2c_o.jpg

Ok! The casting don’t work with all the parts :cry:!
But I glued and paint the original printet parts …
Final_1.jpg
Final_02_1.jpg
Final_03_1.jpg
Final_04_1.jpg

Attachments

Final_1.jpg

Final_02_1.jpg

Final_04_1.jpg

That’s some excellent work! Especially considering you made moulds and cast this - really nice!!

The casting don’t work :confused:
The finer parts broke everytime! Or the parts was so fine, that the artstone don’t get into it. But was a experience!